Description
A skirt made of rings
The figure is one print from hem to bow. The skirt is not a smooth cone: it is a stack of concentric rings, each one slightly wider than the ring above it, which produces a stepped, flared silhouette when you look at it side-on. On top of that sits the dancer – round face, closed eyes, a bow across her hair, both arms held out to the sides.
Numbers
- Size – 2.65 in tall, 3.44 in across the skirt (67 x 87 mm).
- Weight – 57 g. 0.2 mm layers, 2 walls, 15% grid infill.
- Print time – about 2 h 13 m on a Bambu Lab A1.
- Supports – tree supports under the arms, removed and cleaned by hand. A faint scar may remain under one arm; it sits on the underside.
- Material – PLA, matte. Indoor decor; keep it away from radiators and open flame.
Where it stands
The round base is wider than the skirt, so it does not tip when a shelf gets bumped. It reads well at eye level on a dresser, a bedside table or a narrow shelf, and at 2.65 in it fits where a bigger figurine would not.
How it ships
Made to order in seven colors, packed in recycled cardboard. Layer lines follow the ring steps on the skirt and are visible up close; there is no paint or coating.









Reviews
There are no reviews yet.