Description
One shape, no base
The body tapers from a wide foot to a narrow chest, with a shallow vertical groove running the full height. Those grooves do two things: they break up the layer lines you would otherwise see on a smooth cone, and they give the surface something to catch light. The antlers branch in a flat plane, the eyes are closed, and the nose is a small sphere pressed onto the muzzle.
Numbers
- Size — 5.91 in tall, 1.99 in wide at the foot, 1.89 in deep (150 × 50.6 × 48 mm).
- Weight — 39 g. 0.2 mm layers, 2 walls, 10% zig-zag infill.
- Print time — about 1 h 35 m.
- Supports — tree supports under the antler tips, removed and cleaned by hand. You may find a faint support scar under the antler; it is on the underside and does not show when standing.
- Material — PLA, matte. Keep it off a radiator or a sunny windowsill in summer.
Where it works
Two of them side by side read as a pair. Three at slightly different heights fill a narrow shelf without needing a backdrop. It stands without a base, so nothing tips when you bump the shelf.
How it ships
Made to order in seven colors. Small layer lines and a light matte sheen are part of the print; there is no paint or coating on it.









Reviews
There are no reviews yet.