Description
Brushes crammed into one cup stay wet, knock against each other and collect whatever is on the shelf. This holder separates them: three round slots, spaced far enough apart that heads dry in open air, plus a flat slot in front for the toothpaste tube.
The front is cut into a face — two round eyes and a long mouth — which makes it an easy one for kids to use, and a little less grim than a metal tumbler on the sink edge.
What it holds
- Three brush slots — sized for standard manual handles and most electric brush bases; heads stay clear of each other.
- Front tray slot — a toothpaste tube lies flat and drains, instead of rolling off the counter into the basin.
- Honeycomb walls — the perforated sides let air through so the inside of the holder does not stay damp.
- Flat base, no mounting — stands on the sink, a shelf or a shared family counter without drilling anything.
Printed in PETG, not PLA
A bathroom is the wrong place for PLA: warm water softens it and toothpaste residue leaves it chalky. This holder is printed in PETG, which holds its shape and surface in a wet environment.
Specs
| Material | PETG, matte finish, 0.2 mm layers |
| Size | 3.94 × 3.07 × 2.83 in (10.0 × 7.8 × 7.2 cm) |
| Weight | 3.31 oz (94 g) |
| Colors | Black / White / Red / Orange / Yellow / Green / Blue |
| Printer | Bambu Lab A1, 0.4 mm nozzle |
Care
Rinse under warm water; the honeycomb sides clear with a soft brush if toothpaste collects in the holes. Not dishwasher safe — hand wash only.
Printed to order. Layer lines are visible at close range and are part of the FDM process, not a defect.









Reviews
There are no reviews yet.