Description
Nothing to snap together
Every vertebra, rib and limb segment is printed already linked. The joints are ball-and-socket pairs with a measured gap, so the model comes off the plate assembled and moves immediately. No pins, no elastic, no glue, no screwdriver.
Numbers
- Size — 8.32 in long nose to tail tip, 8.45 in across the front limbs, 1.98 in tall standing (211 × 215 × 50 mm).
- Weight — 64 g. 0.2 mm layers, 4 walls, 15% gyroid infill.
- Print time — about 3 h 15 m on a 220 mm bed.
- Supports — none. The pose is designed to print unsupported.
- Material — PLA. Fine on a desk; do not leave it on a dashboard in summer.
How it behaves
The neck, jaw, four limbs and the full tail all articulate. It stands on its own feet, sits back on its tail, or coils into a resting curl. Joints are tight at first and loosen slightly with use — that is expected, and it is how these prints are meant to feel.
How it ships
Made to order in seven colors. Small strings inside the joint gaps are normal on a print-in-place model and can be pulled out with tweezers if they bother you.









Reviews
There are no reviews yet.