Description
Three zones, one tray
On the left, two cups sit at different heights: the front one lower and open, the back one taller with a divider. On the right, an angled slot takes a phone or a small tablet upright. Both sit on a single oval tray that catches the things that fall out of the cups.
Numbers
- Size – 7.39 in long, 4.80 in deep, 4.26 in at the tallest point (188 x 122 x 108 mm).
- Weight – 172 g. 0.2 mm layers, 2 walls, 3% grid infill – deliberately low, so it stays light for its size.
- Print time – about 4 h 38 m on a Bambu Lab A1.
- Supports – tree supports under the bows and the phone lip, removed by hand.
- Material – PLA, matte. Indoor use only.
The bows
Each bow is a raised relief built into the wall as it prints – the knot, the two loops and the ribbon tails are all one continuous surface with the cup. Nothing is glued on, so nothing can peel off later.
How it ships
Made to order in seven colors, packed in recycled cardboard. Layer lines are visible on the flat walls and around the bows; no paint or coating.









Reviews
There are no reviews yet.