Wall-Mount Trash Bag Dispenser

$8.99

A slim printed cylinder that clips inside the cabinet door and feeds out one tall-kitchen bag at a time, so the roll never sits on the counter again.

  • Arrives intact or we replace it free
  • Tracked shipping to your door
  • Secure PayPal checkout
Your order is covered. If anything arrives damaged or isn’t what you expected, message us within 7 days with a photo and we’ll make it right — a free replacement or a full refund, your choice. Read our shipping & returns policy.

Description

Give the bag roll a home

Kitchen bag rolls usually end up loose in a drawer, wedged behind the bin, or balanced on the counter. This dispenser is a 4.92 in tube that mounts to the inside of a cabinet door and does one job: it feeds a single bag through a slot at the bottom. Pull down, the bag tears off at the perforation, the next one waits inside.

What it actually is

  • Size — 4.92 × 1.73 × 1.85 in (125 × 44 × 47 mm). The tube is 1.73 in across, so it clears most door frames without hitting the hinge side.
  • Weight — 63 g. Printed at 0.16 mm layers with 4 walls and 8% gyroid infill: solid where it needs to resist pulling, light everywhere else.
  • Print time — about 1 h 40 m per unit on a Bambu Lab A1.
  • Material — PLA. It does not like heat: keep it away from the stovetop side of the cabinet and out of a hot car.

Mounting

A flat back tab sits against the door panel. On doors with a shelf lip it hangs on its own; on smooth flat doors add a strip of double-sided tape behind the tab for a firmer hold. No drilling needed either way.

How it ships

Made to order in seven colors, packed in recycled cardboard, and printed here rather than pulled from a warehouse shelf. Slight layer lines and a faint seam are part of how it was made, not defects.

Additional information

Weight 0.063 kg
Dimensions 4.92 × 1.85 × 1.73 cm
Color

Black, White, Red, Orange, Yellow, Green, Blue

Reviews

There are no reviews yet.

Be the first to review “Wall-Mount Trash Bag Dispenser”

Your email address will not be published. Required fields are marked *